Respirable Dust Sampler VRDS 500ENL
| Business Type | Manufacturer, Exporter, Supplier, Retailer |
| Type | Respirable Dust Sampler |
| Weight | 58 Kg |
| Voltage | 220V |
| Click to view more | |
Preferred Buyer From
| Location | Anywhere in India |
Product Details
Condition
New
Features
Durable, Eco Friwndly, Fine Finished, Precise Design
Warranty
ALL VAIBHAV PRODUCTS CARRY 14 MONTH WARRANTY
Display
Digital
Flow Rate
Free flow 0.9 – 1.4 m3/min free flow with filter and more than 2.0 m3/min without filter
Automation Grade
Semi Automatic
Brand Name
VAIBHAV
Power
AC
Basic features
Brushless & belt less almost maintenance free & zero consumable noise less turbine blower, electronic manometer in place of glass manometer, digital flow indicator & volume totalizer, Digital Manomete
Particulate Sampling
10micron down to 0.1micron (depending upon filter used). A cyclone is used for fractionating the dust into 2 fractions, D50 cutoff for the cyclone is at 10microns. RSPM is accumulated on the filter
Filter Holder
To accommodate any standard filter paper of 25 x 20 cm, particulate bigger than 10 micron collected in separate dust cap under the cyclone
Filter Media
8” X 10” (203mm X 254mm / 20.3cm X 25.4 cm) Glass microfiber filter for common use and EPM 2000 or equivalent for special monitoring / research work
IS Reference
Match the requirement prescribed in BIS 5182(Part-23) 2006
Timer Recorder
0 to 99999.99 hrs. time totalizer records the running time in hours
Clock / Timer
Programmable Real Time control system with control of automatic start & stop, number of required intervals can be programmed, Timer is used to start and shut off the sampler at preset time
Sampling Time
30 hours (maximum)
Power Requirement
Single phase AC 220 volts, 50 Hz, sampler unaffected by +/- 10 % fluctuation in supply voltage. For proper operation and safety a good earth connection is mandatory
Dimension
Approximately 410mm X 300mm X 700mm
Particle Size
Separate provision for collection of Respirable and non Respirable (less than and greater than 10 micron) size particles
Construction
The body of RDS is robust enough to withstand impacts and vibration in transportation; it is made of heavy aluminum sheet.
Night View
Provision has been made for light in the sampler for taking reading during dark area and in night hours and
Hardware
Only SS corrosion free hardware used in sampler
Product Code
VRDS 500ENL
Payment Terms
L/C, D/P
Delivery Time
READY STOCK
special features
- digital manometer with volume totalizing (waterless manometer, no need of filling and adjusting zero lever with distilled water)
- provide sample volume in m3 at any stage of sampling
- modular design for easy operation
- sturdy aluminum construction with ss hardware
- glass manometer tube brakeage and water evaporation were eliminated due to digital manometer
- low noise during operations
- less variation in flow even chocking of filter
- maintenance free noiseless suction assembly
- totally eliminated of emi
- compact, portable, easy to operate-transport & handle
- arrangement for parallel gaseous sampling
- light provision for working in night & dark area
- design to runs continuously 24 hours or more
- castor provide easy internal movement
- common body (housing) structure for all the model which will easy converted to any of the vrds 500 series model
- suitable for outdoor use, corrosion free lockable housing
Looking for "Respirable Dust Sampler VRDS 500ENL" ?
Set(s)
